# Issue With Y+ Analogue on Trimui Smart Pro
**URL:** https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676
**Category:** 2601 Jacaranda
**Tags:** system
**Created:** [September 16, 2026, 1:31pm UTC](https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676 "2026-09-16T13:31:33Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@stefman69](https://community.muos.dev/u/stefman69)
#### Post date: [September 16, 2026, 1:31pm UTC](https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676/1 "2026-09-16T13:31:33Z")
So I have been working on a pot for Morrowind for the TSP/TSPS and I’m pretty much done, but I was hoping to add compatibility for a few more operating systems. This was probably the easiest to get setup and it has the best performance of any of the TSP OS’s I have tried too, but I can’t seem to find a way to get up presses on the analogue sticks to work properly. It seems like they work up to about 70-75% of their range, but pressing past that when centered on up does not register in input tester and seems to register around 50-60% of full when held up in game. I’ve made a workaround that limits the up direction to around 70%, but it is rough for the right stick when aiming. If you have any advice on how to fix this problem it would be greatly appreciated.
---
### Author:  [@bgelmini](https://community.muos.dev/u/bgelmini)
#### Post date: [September 16, 2026, 6:46pm UTC](https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676/2 "2026-09-16T18:46:21Z")
> [@Joystick calibration tool](https://community.muos.dev/t/joystick-calibration-tool/1339/2):
>
> Joystick calibration is highly experimental and may not yield the results you actually want anyway. usage: joycal /dev/input/eventX [options] options: --duration N movement capture seconds (default 5) --noise N centre noise capture seconds (default 2) --margin F margin fraction (default 0.02) --deadzone-pad N add padding to computed deadzone (default 8) --axes CSV only these ABS codes (e.g. 0,1,3,4) --include-hats include ABS\_H…
---
### Author:  [@stefman69](https://community.muos.dev/u/stefman69)
#### Post date: [September 18, 2026, 7:27am UTC](https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676/3 "2026-09-18T07:27:51Z")
Yeah the joystick calibrator did not help. I spent last night building an application that calibrates the sticks and outputs a replacement for the trimui\_inputd\_smart\_pro file. Idk if you guys have a TSP you could try it on but if you want to it’s on my github:
> **[GitHub - stefman69/muOS-Trimui-Smart-Pro-Stick-Fix: There is a bug when pressing up fully on the...](https://github.com/stefman69/muOS-Trimui-Smart-Pro-Stick-Fix)**
>
> There is a bug when pressing up fully on the sticks on the Trimui Smart Pro with muOS. This is a two file fix that replaces the middle man between the physical hardware and the OS and allows for proper stick processing and celebration.
---
### Author:  [@stefman69](https://community.muos.dev/u/stefman69)
#### Post date: [September 21, 2026, 9:53am UTC](https://community.muos.dev/t/issue-with-y-analogue-on-trimui-smart-pro/1676/4 "2026-09-21T09:53:46Z")
Hey idk if I responded to your message or mine previously, but I’d really like to know if this is a workable fix for this before I finish up my Morrowind port for the TSP/TSPS. If you can’t test it on your end I might check in one of the subreddits for this console and see if anyone else can.
> **[GitHub - stefman69/muOS-Trimui-Smart-Pro-Stick-Fix: There is a bug when pressing up fully on the...](https://github.com/stefman69/muOS-Trimui-Smart-Pro-Stick-Fix)**
>
> There is a bug when pressing up fully on the sticks on the Trimui Smart Pro with muOS. This is a two file fix that replaces the middle man between the physical hardware and the OS and allows for proper stick processing and celebration.