Issue Update from 2601.0 Jacaranda to 2601.1 Funky Jacaranda with Update Archive (2)

stoic0220 · March 9, 2026, 3:06am

A few days ago, I posted a question about a problem installing the update. First of all, thank you for your reply and for taking the time to help.

Following your instructions, I installed the 2601.1 update, but the same issue occurs where it does not proceed past the boot logo screen.

I also tried installing it using two different SD cards that I know work properly, formatted in both exFAT and FAT32, but the same problem still occurs.

The asterisk (*) itself is not actually a very important issue. I asked because the version is not displayed as 2601.1, and from a regular user’s perspective it’s hard to know whether the update was installed correctly or if there might be a problem with the full image or the update file.

I’m also attaching logs, although I’m not sure if this is the correct one. If you need any other logs or files, please let me know and I will upload them as well.

[ 1.060838] get ehci1-controller wakeup-source is fail.
[ 1.060941] sunxi ehci1-controller don’t init wakeup source
[ 1.060961] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff80091d1568, 0x:ffffff8009c24000, irq_no:11e
[ 1.061014] 5200000.ehci1-controller supply drvvbus not found, using dummy regulator
[ 1.061126] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.061154] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1
[ 1.061564] sunxi-ehci 5200000.ehci1-controller: irq 286, io mem 0x3f3a4f4b
[ 1.083823] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00
[ 1.084789] hub 1-0:1.0: USB hub found
[ 1.084824] hub 1-0:1.0: 1 port detected
[ 1.085381] get drv_vbus is fail, 84
[ 1.085388] get ehci2-controller, regulator_io is no nocare
[ 1.085394] get ehci2-controller wakeup-source is fail.
[ 1.085507] sunxi ehci2-controller don’t init wakeup source
[ 1.085516] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff80091d18b8, 0x:ffffff8009c2e000, irq_no:120
[ 1.085554] 5310000.ehci2-controller supply drvvbus not found, using dummy regulator
[ 1.085648] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.085671] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2
[ 1.085836] sunxi-ehci 5310000.ehci2-controller: irq 288, io mem 0x40b0f18b
[ 1.113814] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00
[ 1.114601] hub 2-0:1.0: USB hub found
[ 1.114633] hub 2-0:1.0: 1 port detected
[ 1.115138] get drv_vbus is fail, 84
[ 1.115145] get ehci3-controller, regulator_io is no nocare
[ 1.115151] get ehci3-controller wakeup-source is fail.
[ 1.115269] sunxi ehci3-controller don’t init wakeup source
[ 1.115277] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff80091d1c08, 0x:ffffff8009c38000, irq_no:122
[ 1.115309] 5311000.ehci3-controller supply drvvbus not found, using dummy regulator
[ 1.115401] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.115424] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3
[ 1.115595] sunxi-ehci 5311000.ehci3-controller: irq 290, io mem 0x42770cae
[ 1.143816] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00
[ 1.144588] hub 3-0:1.0: USB hub found
[ 1.144619] hub 3-0:1.0: 1 port detected
[ 1.145564] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.145794] get ohci0-controller, regulator_io is no nocare
[ 1.145802] get ohci0-controller wakeup-source is fail.
[ 1.145920] sunxi ohci0-controller don’t init wakeup source
[ 1.145929] hci: request ohci0-controller gpio:272
[ 1.151419] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff80091d04d8
[ 1.151425] [sunxi-ohci0]: Not init ohci0
[ 1.151520] get ohci1-controller, regulator_io is no nocare
[ 1.151527] get ohci1-controller wakeup-source is fail.
[ 1.151629] sunxi ohci1-controller don’t init wakeup source
[ 1.151636] hci: request ohci1-controller gpio:147
[ 1.157130] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff80091d0828
[ 1.157161] 5200000.ohci1-controller supply drvvbus not found, using dummy regulator
[ 1.157275] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 ‘Open’ Host Controller (OHCI) Driver
[ 1.157298] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4
[ 1.157360] sunxi-ohci 5200000.ohci1-controller: irq 287, io mem 0x44a223b5
[ 1.229641] hub 4-0:1.0: USB hub found
[ 1.229674] hub 4-0:1.0: 1 port detected
[ 1.230165] get drv_vbus is fail, 84
[ 1.230172] get ohci2-controller, regulator_io is no nocare
[ 1.230178] get ohci2-controller wakeup-source is fail.
[ 1.230287] sunxi ohci2-controller don’t init wakeup source
[ 1.230371] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff80091d0b78
[ 1.230400] 5310000.ohci2-controller supply drvvbus not found, using dummy regulator
[ 1.230487] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 ‘Open’ Host Controller (OHCI) Driver
[ 1.230509] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5
[ 1.230570] sunxi-ohci 5310000.ohci2-controller: irq 289, io mem 0x49524b20
[ 1.298584] hub 5-0:1.0: USB hub found
[ 1.298615] hub 5-0:1.0: 1 port detected
[ 1.299098] get drv_vbus is fail, 84
[ 1.299105] get ohci3-controller, regulator_io is no nocare
[ 1.299111] get ohci3-controller wakeup-source is fail.
[ 1.299221] sunxi ohci3-controller don’t init wakeup source
[ 1.299306] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff80091d0ec8
[ 1.299334] 5311000.ohci3-controller supply drvvbus not found, using dummy regulator
[ 1.299420] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 ‘Open’ Host Controller (OHCI) Driver
[ 1.299442] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6
[ 1.299498] sunxi-ohci 5311000.ohci3-controller: irq 291, io mem 0x4d6e1d67
[ 1.368586] hub 6-0:1.0: USB hub found
[ 1.368618] hub 6-0:1.0: 1 port detected
[ 1.369604] usbcore: registered new interface driver uas
[ 1.369776] usbcore: registered new interface driver usb-storage
[ 1.369849] usbcore: registered new interface driver ums-alauda
[ 1.369917] usbcore: registered new interface driver ums-cypress
[ 1.369984] usbcore: registered new interface driver ums-datafab
[ 1.370049] usbcore: registered new interface driver ums_eneub6250
[ 1.370115] usbcore: registered new interface driver ums-freecom
[ 1.370182] usbcore: registered new interface driver ums-isd200
[ 1.370253] usbcore: registered new interface driver ums-jumpshot
[ 1.370319] usbcore: registered new interface driver ums-karma
[ 1.370386] usbcore: registered new interface driver ums-onetouch
[ 1.370471] usbcore: registered new interface driver ums-realtek
[ 1.370538] usbcore: registered new interface driver ums-sddr09
[ 1.370605] usbcore: registered new interface driver ums-sddr55
[ 1.370674] usbcore: registered new interface driver ums-usbat
[ 1.370733] usb_serial_number:20080411
[ 1.371196] –[allen]– sunxi_gpadc_probe: 321
[ 1.376312] —[allen] sunxi_gpadc_probe: allen_gpadc_enable_flg=1
[ 1.383850] usbcore: registered new interface driver xpad
[ 1.391480] —[allen] axp20x_pek_probe: 907 wakup_irq=120
[ 1.397881] —[allen] hall_switch_isr: 711
[ 1.398103] input: axp2202-pek as /devices/platform/soc/twi5/i2c-5/5-0034/axp2101-pek.0/input/input0
[ 1.402228] rtc-pcf8563 5-0051: rtc core: registered rtc-pcf8563 as rtc0
[ 1.403281] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc1
[ 1.403335] sunxi-rtc rtc: RTC enabled
[ 1.403680] i2c /dev entries driver
[ 1.404269] sunxi cedar version 0.1
[ 1.404357] VE: install start!!!

[ 1.404442] cedar_ve: cedar-ve the get irq is 277
[ 1.404754] VE: get debugfs_mpp_root is NULL, please check mpp

[ 1.412979] VE: sunxi ve debug register driver failed!

[ 1.423822] —[allen] hall_press_work_func: state=1
[ 1.424761] axp2202_usb_power: axp2202-acin device is not configed, not use vbus-det

[ 1.447707] axp2202_battery: radio:50

[ 1.448158] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[ 1.468685] device-mapper: uevent: version 1.0.3
[ 1.469157] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.469287] Bluetooth: HCI UART driver ver 2.3
[ 1.469296] Bluetooth: HCI UART protocol H4 registered
[ 1.469302] Bluetooth: HCI UART protocol LL registered
[ 1.469308] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.473911] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
[ 1.473929] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
[ 1.473944] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
[ 1.473959] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
[ 1.473974] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0
[ 1.473988] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag
[ 1.474358] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
[ 1.474424] sunxi-mmc sdc0: ctl-spec-caps 608
[ 1.474593] sunxi-mmc sdc0: No vmmc regulator found
[ 1.474600] sunxi-mmc sdc0: No vqmmc regulator found
[ 1.474607] sunxi-mmc sdc0: No vdmmc regulator found
[ 1.474614] sunxi-mmc sdc0: No vd33sw regulator found
[ 1.474621] sunxi-mmc sdc0: No vd18sw regulator found
[ 1.474628] sunxi-mmc sdc0: No vq33sw regulator found
[ 1.474634] sunxi-mmc sdc0: No vq18sw regulator found
[ 1.475181] sunxi-mmc sdc0: set host busy
[ 1.475255] mmc:failed to get gpios
[ 1.479405] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.503996] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.533940] sunxi-mmc sdc0: detmode:alway in(non removable)
[ 1.533964] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.536413] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.537654] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
[ 1.537709] sunxi-mmc sdc2: ctl-spec-caps 608
[ 1.537966] sunxi-mmc sdc2: No vmmc regulator found
[ 1.537974] sunxi-mmc sdc2: No vdmmc regulator found
[ 1.537981] sunxi-mmc sdc2: No vd33sw regulator found
[ 1.537988] sunxi-mmc sdc2: No vd18sw regulator found
[ 1.537995] sunxi-mmc sdc2: No vq33sw regulator found
[ 1.538001] sunxi-mmc sdc2: No vq18sw regulator found
[ 1.538455] mmc0: mmc_sd_init_card() debug
[ 1.538467] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.539594] sunxi-mmc sdc2: set host busy
[ 1.539656] sunxi-mmc sdc2: Got CD GPIO
[ 1.540906] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.542060] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.563938] sunxi-mmc sdc2: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.593889] sunxi-mmc sdc2: detmode:gpio polling
[ 1.593912] sunxi-mmc sdc2: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 1.595550] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29)
[ 1.595592] sunxi-mmc sdc1: ctl-spec-caps 8
[ 1.595739] sunxi-mmc sdc1: No vmmc regulator found
[ 1.595747] sunxi-mmc sdc1: No vqmmc regulator found
[ 1.595754] sunxi-mmc sdc1: No vdmmc regulator found
[ 1.595761] sunxi-mmc sdc1: No vd33sw regulator found
[ 1.595767] sunxi-mmc sdc1: No vd18sw regulator found
[ 1.595774] sunxi-mmc sdc1: No vq33sw regulator found
[ 1.595781] sunxi-mmc sdc1: No vq18sw regulator found
[ 1.596152] sunxi-mmc sdc1: set host busy
[ 1.596229] mmc:failed to get gpios
[ 1.596770] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.600356] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.603600] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 1.603668] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
[ 1.603833] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
[ 1.603920] mmc0: new high speed SDHC card at address 0001
[ 1.604634] mmcblk0: mmc0:0001 SD 29.1 GiB
[ 1.607103] mmcblk0: p1 p2 p3 p4 p5 p6
[ 1.623934] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.653891] sunxi-mmc sdc1: detmode:manually by software
[ 1.654838] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.655804] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 1.659211] usbcore: registered new interface driver usbhid
[ 1.659215] usbhid: USB HID core driver
[ 1.659633] ashmem: initialized
[ 1.661528] optee: probing for conduit method from DT.
[ 1.661536] optee: api uid mismatch
[ 1.662210] usbcore: registered new interface driver snd-usb-audio
[ 1.662633] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 1.663318] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 1.668631] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.669977] u32 classifier
[ 1.669982] Actions configured
[ 1.669995] Netfilter messages via NETLINK v0.30.
[ 1.670016] nfnl_acct: registering with nfnetlink.
[ 1.670393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.670636] ctnetlink v0.93: registering with nfnetlink.
[ 1.671133] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 1.671187] xt_time: kernel timezone is -0000
[ 1.671304] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 1.672016] gre: GRE over IPv4 demultiplexor driver
[ 1.672023] ip_gre: GRE over IPv4 tunneling driver
[ 1.673025] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.679052] IPv4 over IPsec tunneling driver
[ 1.679722] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.685728] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.685997] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.686060] Initializing XFRM netlink socket
[ 1.686088] IPsec XFRM device driver
[ 1.686415] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.692724] NET: Registered protocol family 10
[ 1.693107] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
[ 1.699004] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
[ 1.701066] mip6: Mobile IPv6
[ 1.701098] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.702186] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.703478] NET: Registered protocol family 17
[ 1.703507] NET: Registered protocol family 15
[ 1.703600] Bluetooth: RFCOMM TTY layer initialized
[ 1.703620] Bluetooth: RFCOMM socket layer initialized
[ 1.703647] Bluetooth: RFCOMM ver 1.11
[ 1.703662] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.703677] Bluetooth: HIDP socket layer initialized
[ 1.703707] l2tp_core: L2TP core driver, V2.0
[ 1.703723] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.704707] Registered cp15_barrier emulation handler
[ 1.704721] Registered setend emulation handler
[ 1.705532] registered taskstats version 1
[ 1.706224] HDMI 2.0 driver init start!
[ 1.706236] boot_hdmi=false
[ 1.706957] Can not find the node of esm
[ 1.706969] ERROR: pinctrl_get for HDMI2.0 DDC fail
[ 1.712538] Get hdmi_power0:vcc-hdmi
[ 1.712586] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator
[ 1.712653] Get hdmi_power1:vdd-hdmi
[ 1.712679] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator
[ 1.714141] hdmi_cec_init
[ 1.714877] HDMI2.0 module init end
[ 1.725563] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated
[ 1.728057] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
[ 1.728070] cpu cpu0: _opp_add: OPP not supported by regulators (600000000)
[ 1.728339] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
[ 1.728348] cpu cpu0: _opp_add: OPP not supported by regulators (792000000)
[ 1.728724] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
[ 1.728733] cpu cpu0: _opp_add: OPP not supported by regulators (1032000000)
[ 1.729121] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
[ 1.729130] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000)
[ 1.729408] core: _opp_supported_by_regulators: OPP minuV: 0 maxuV: 0, not supported by regulator
[ 1.729417] cpu cpu0: _opp_add: OPP not supported by regulators (1344000000)
[ 1.729728] cpu cpu1: opp_list_debug_create_link: Failed to create link
[ 1.737203] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.737240] cpu cpu2: opp_list_debug_create_link: Failed to create link
[ 1.737246] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.737280] cpu cpu3: opp_list_debug_create_link: Failed to create link
[ 1.737286] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
[ 1.738402] get id is fail, 84
[ 1.739645] input: muOS-Keys as /devices/platform/soc/soc@03000000:gpio_keys/input/input1
[ 1.739699] --adc_joystick_open: adc[0] adc->cal = 1810
[ 1.739732] --adc_joystick_open: adc[1] adc->cal = 1804
[ 1.739765] --adc_joystick_open: adc[2] adc->cal = 1806
[ 1.739797] --adc_joystick_open: adc[3] adc->cal = 1800
[ 1.740784] input: dierct-keys-polled as /devices/platform/dierct-keys-polled/input/input2
[ 1.782123] rtc-pcf8563 5-0051: setting system clock to 2025-12-31 15:15:24 UTC (1767194124)
[ 1.783605] [sound 402][CODEC-HDMI sunxi_codec_dev_probe] register codec-hdmi success
[ 1.793366] [asoc_simple_probe, 432]
[ 1.798109] sunxi-snd-mach soc@03000000:codec_mach: sunxi-snd-codec ↔ soc@03000000:codec_plat mapping ok
[ 1.798758] [asoc_simple_probe, 432]
[ 1.803008] sunxi-snd-mach soc@03000000:ahub_dam_mach: snd-soc-dummy-dai ↔ 5097000.ahub_dam_plat mapping ok
[ 1.803352] [asoc_simple_probe, 432]
[ 1.807473] [asoc_simple_probe, 432]
[ 1.812046] sunxi-snd-mach soc@03000000:ahub1_mach: soc@03000000:hdmi_codec ↔ soc@03000000:ahub1_plat mapping ok
[ 1.812716] [asoc_simple_probe, 432]
[ 1.814732] axp2202-dcdc4: disabling
[ 1.814940] axp2202-cldo4: disabling
[ 1.815368] ALSA device list:
[ 1.815371] #0: audiocodec
[ 1.815373] #1: ahubdam
[ 1.815375] #2: ahubhdmi
[ 1.816646] Freeing unused kernel memory: 2688K
[ 1.848021] EXT4-fs (mmcblk0p5): barriers disabled
[ 2.053657] EXT4-fs (mmcblk0p5): 4 orphan inodes deleted
[ 2.053663] EXT4-fs (mmcblk0p5): recovery complete
[ 2.062578] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0,data=ordered
[ 2.375250] EXT4-fs (mmcblk0p5): re-mounted. Opts: (null)
[ 2.473853] —[allen] hall_release_work_func: 0000
[ 2.541635] random: chronyd: uninitialized urandom read (4096 bytes read)
[ 2.733258] udevd[1320]: starting version 3.2.14
[ 2.746671] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.748163] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.774487] udevd[1321]: starting eudev-3.2.14
[ 3.787548] mali_kbase: loading out-of-tree module taints kernel.
[ 3.804230] mali gpu: Regulators probed: 0
[ 3.804304] mali gpu: Clocks probed: 2
[ 3.804922] mali gpu: [960mv-648MHz] bak[950mv-600MHz] inde_power:0 idle:1 dvfs:1
[ 3.805065] mali gpu: GPU identified as 0x3 arch 7.0.9 r0p0 status 0
[ 3.805322] mali gpu: No memory group manager is configured
[ 3.806031] mali gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 3.807013] mali gpu: Probed as mali0
[ 3.807284] [asoc_simple_probe, 432]
[ 4.241022] random: crng init done
[ 4.241031] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.840950] [EXFAT] trying to mount…
[ 5.488387] sunxi-bt soc@03000000:bt: set block: 0
[ 5.572297] RTW: module init start
[ 5.572306] RTW: rtl8821cs v5.5.1_32758.20190403_COEX20180712-3232
[ 5.572310] RTW: build time: Dec 24 2025 14:56:40
[ 5.572314] RTW: rtl8821cs BT-Coex version = COEX20180712-3232
[ 5.572327] sunxi-wlan soc@03000000:wlan: bus_index: 1
[ 5.573849] sunxi-wlan soc@03000000:wlan: check wlan wlan_power voltage: 3300000
[ 5.683978] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.684248] RTW: module init ret=0
[ 5.713873] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.754704] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 5.761517] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
[ 5.767515] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.770057] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.771499] sunxi-mmc sdc1: card claims to support voltages below defined range
[ 5.773292] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.793867] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
[ 5.804996] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B
[ 5.805754] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-DDR50 dt B
[ 5.805805] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing UHS-DDR50 dt B
[ 5.806532] mmc2: new ultra high speed DDR50 SDIO card at address 0001
[ 5.807015] RTW: == SDIO Card Info ==
[ 5.807020] RTW: clock: 50000000 Hz
[ 5.807024] RTW: timing spec: sd uhs DDR50
[ 5.807035] RTW: sd3_bus_mode: TRUE
[ 5.807039] RTW: ================
[ 5.807114] RTW: [HALMAC]11692M
HALMAC_MAJOR_VER = 1
HALMAC_PROTOTYPE_VER = 5
HALMAC_MINOR_VER = 0
HALMAC_PATCH_VER = 5
[ 5.833189] RTW: HW EFUSE
[ 5.833204] RTW: 0x000: 29 81 00 BC 09 10 28 00 AA 04 AD 75 10 8E 30 0B
[ 5.833258] RTW: 0x010: FF FF FF FF FF FF FF FF FF FF FF 02 FF FF FF FF
[ 5.833311] RTW: 0x020: FF FF 2A 28 29 29 2C 2A 29 2A 2B 2D 2D 2A 29 2B
[ 5.833364] RTW: 0x030: 02 FF FF FF FF FF E0 FF FF FF 2E 2E 2E 2E 2E 2E
[ 5.833417] RTW: 0x040: 2F 2F 2F 2F 2F 02 FF FF FF FF FF FF FF FF FF FF
[ 5.833470] RTW: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833523] RTW: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833575] RTW: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833628] RTW: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833681] RTW: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833733] RTW: 0x0A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.833810] RTW: 0x0B0: FF FF FF FF FF FF FF FF 7F 2F 1F 00 FF FF FF FF
[ 5.833863] RTW: 0x0C0: FF 21 00 41 00 00 00 00 00 FF 02 FF FF FF FF FF
[ 5.833916] RTW: 0x0D0: 7E D1 01 23 34 FF FF FF 20 04 4C 02 21 C8 21 02
[ 5.833968] RTW: 0x0E0: 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
[ 5.834021] RTW: 0x0F0: 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
[ 5.834074] RTW: 0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5.834127] RTW: 0x110: 00 EB 00 6E 01 00 00 00 00 FF 68 8F C9 89 D9 58
[ 5.834180] RTW: 0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834233] RTW: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834285] RTW: 0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834338] RTW: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834391] RTW: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834443] RTW: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834496] RTW: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834549] RTW: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834602] RTW: 0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834655] RTW: 0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834707] RTW: 0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834760] RTW: 0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834813] RTW: 0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834865] RTW: 0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 5.834975] RTW: hal_com_config_channel_plan chplan:0x7F
[ 5.856546] RTW: c2h_mac_hidden_rpt_hdl: 0x60
[ 5.856552] RTW: c2h_mac_hidden_rpt_hdl: 0x2E
[ 5.856555] RTW: c2h_mac_hidden_rpt_hdl: 0xE7
[ 5.856559] RTW: c2h_mac_hidden_rpt_hdl: 0xB1
[ 5.856562] RTW: c2h_mac_hidden_rpt_hdl: 0xF6
[ 5.856566] RTW: c2h_mac_hidden_rpt_hdl: 0xFF
[ 5.856569] RTW: c2h_mac_hidden_rpt_hdl: 0x37
[ 5.856573] RTW: c2h_mac_hidden_rpt_hdl: 0xFF
[ 5.856577] RTW: uuid x:0x60 y:0x2e z:0x7 crc:0x58f
[ 5.856580] RTW: hci_type:0x6
[ 5.856584] RTW: package_type:0x7
[ 5.856587] RTW: tr_switch:0x1
[ 5.856590] RTW: wl_func:0xf
[ 5.856594] RTW: hw_stype:0xf
[ 5.856597] RTW: bw:0x7
[ 5.856600] RTW: ant_num:0x1
[ 5.856603] RTW: protocol:0x3
[ 5.856607] RTW: nic:0x3
[ 5.856612] RTW: c2h_mac_hidden_rpt_2_hdl: 0xFF
[ 5.856615] RTW: c2h_mac_hidden_rpt_2_hdl: 0xFF
[ 5.856619] RTW: c2h_mac_hidden_rpt_2_hdl: 0xF8
[ 5.856622] RTW: c2h_mac_hidden_rpt_2_hdl: 0xFC
[ 5.856626] RTW: c2h_mac_hidden_rpt_2_hdl: 0xFF
[ 5.858465] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[ 5.906992] RTW: rtw_ndev_init(wlan0) if1 mac_addr=68:8f:c9:89:d9:58
[ 5.908979] RTW: rtw_ndev_init(wlan1) if2 mac_addr=6a:8f:c9:89:d9:58
[ 5.911141] [asoc_simple_probe, 432]
[ 7.302764] [EXFAT] mounted successfully
[ 7.461965] WARN:audio is not on
[ 7.461975] HDMI Audio Enable Successfully
[ 7.569051] WARN:audio is not on
[ 7.569061] HDMI Audio Enable Successfully
[ 7.607160] [sound 164][CODEC sunxi_internal_codec_dai_set_pll] stream → OUT, freq_in ->98304000, freq_out ->98304000
[ 7.872793] [sound 164][CODEC sunxi_internal_codec_dai_set_pll] stream → OUT, freq_in ->98304000, freq_out ->98304000

xonglebongle · March 9, 2026, 3:24am

I’m afraid to say it but it seems like it may be on your end. We have had people successfully both flash the full image as well as install the 2601.1 update to 2601.0 with no issues.

If this were a much bigger problem we would have heard far more reports about it by now as it has been almost two weeks since the 2601.1 release.

It also went through many weeks of testing without any installation issues. So this is very odd that it is happening to you I’m sorry!

Kakashi · March 9, 2026, 4:20am

I also suffer from the same condition

stoic0220 · March 9, 2026, 5:22am

That’s understandable. It could indeed be an issue on my end. However, from a regular user’s perspective, it’s not always easy to clearly know what exactly counts as a “proper” setup.

For reference, I tested with 32GB and 64GB SD cards that both passed H2testw, and I also checked their speeds using CrystalDiskMark. Using Rufus, I tried the following:

Installing the 2601.0 full image, then installing the 2601.1 update archive
Installing the 2601.1 full image, then installing the 2601.1 update archive

In both cases, however, the same issue still occurs where the system does not get past the boot logo. Just to be thorough, I also verified the hash values of the files, and those appeared to be correct as well.

At this point, I think I’ve tried most of the things I can reasonably test on my side. If the problem is indeed related to my environment, I suppose I’ll just stay on the previous version for the time being.

In any case, I really appreciate all the hard work from the developers. Thanks to your efforts, I’ve been having a great time enjoying retro games.

Delibirb77 · March 9, 2026, 9:35am

Installing the 2601.1 full image is enough to be on the latest release. The version number being shown as 2601.0* is merely a visual bug and you are in fact actually on the latest release.

It seems like this method is working for you, as you are able to boot and install the update archive (via the archive manager which only shows following a successful boot). It is likely that installing the update archive once the system is already on the latest update that may be breaking your set up.

Please also perform all tests without sd2 inserted, as there is a common bug where sd2 has not been formatted correctly (hidden partitions which many formatting software miss). If you then have a functioning system after narrowing down the variables and want to use sd2, please copy everything off it, format using the SD formatter tool (this tool successfully formats all hidden partitions, to obtain a single exfat partition), and then copy back your stuff onto sd2.

Other issues that may result in the boot logo hand, that are caused by sd2 include outdated themes or retroarch configurations if you are upgrading from a much older version of muOS, so it is recommended to delete those directories if that is the case.

Good luck, I’m sure you’ll be able to use muOS soon.

stoic0220 · March 9, 2026, 11:04am

Thank you for your reply.

All of my tests were done without using an SD2 card. If the 2601.0* version display is only a visual bug and does not affect anything else, then that is reassuring.

I will look forward to the next improved version that will be released soon. Thank you again.

MustardOS · March 9, 2026, 8:44pm

This topic was automatically closed 60 minutes after the last reply. New replies are no longer allowed.