i tryed muos on my rg35xxsp, but after some trys (see topic just below) i saw that it couldnt work, when i wanted to insert my stock firmware card and swith on the device, nothing happen.
i press longer on the power button but nothing (the level battery was more than a half when i tested muos).
So my device is it bricked?
the muos card can access the memory of the device and alters it?
even if i leave both slots empty, the green led of the device doesnt switch on.
These devices don’t have any kind of internal memory, everything is read from the sd card, so it is not possible to brick the device.
They also do need a working system on the memory card to charge properly.
You are most probably just stuck in fel mode, when the device is not properly shutdown and the sd card is removed.
Without a card press reset three times, insert a working card, hold the power button and while holding press reset 3 times, release the power button. Plug the device to charge and check its status then.
i managed to bring it to life again.
nothing helped (recharged, removed battery, long press power and reset buttons), the green led didn’t want to switch on and nothing happend.
at the end i connected it to an USB port of my computer with a usb data transfert cable. The power button pressed, one time, 2nd time, 3rd time etc… each time a windows sound was produced, showing that something was detected as status changement. And after some button pressions (reset or/and power buttons) the green led finally lights on.
finally all returned fine.
thx
This topic was automatically closed 60 minutes after the last reply. New replies are no longer allowed.